PRODUCT TUNING

Setting up your Kinekt is as easy as 1-2-3

Learn how to get the most out of your Kinekt seatpost and customize your ride. Still stumped? Don’t worry, we’ll show you.

  1. 1. SELECT SPRINGS & INSTALL
  2. 2. ADJUST AS DESIRED
  3. 3. SIT, RIDE, ENJOY

TUNE YOUR RIDE

RECORD YOUR CURRENT POSITION & INSTALL

  • HEIGHT: Middle of bottom bracket to the top of saddle
  • REACH: Saddle tip to the center of the bars at the stem
  • TILT: Tilt of your saddle
  • Install KINEKT 1 cm higher than normal to allow for sag
  • Install your saddle to the post

ESTABLISH YOUR BASE POSITION

  • See rider position A, B, C
  • Sit in normal riding position
  • Tighten pre-load bolt (control knob) until saddle no longer rises when unweighted
  • Reset saddle position using your previously recorded measurements. Use previously recorded height, reach and tilt

CUSTOMIZE YOUR RIDE

  • Loosen or tighten pre-load bolt/control knob until desired comfort, position, and performance are achieved
  • Further adjust during subsequent rides to establish settings for various surfaces
  • Record post settings to repeat favorite set-up on any bike!